Materials
glass pickle jar
frosted paint
large ivy bowl not fluted at the top, for the head
Directions:
Drill a hole in the back of the jar and put a set of mini
lights in it. I used sets of 20
Put about 5-6 in the head and tape them up. Let the rest fall
into the body and the plug run through the hole.
Glue the head (ivy bowl) on good with glue gun. I used the 1 inch bit
for the hole. The head ;I glued on with glue gun as The
glass glue I couldn't get the head off to change the
lights, so use lots of glue from the glue gun, it will
hold.
If you use glue for glass you won't be able to get the head off
to change the lights if need be.
You can get the glass bottle (gallon) at any deli or pizza
place free, the rest is all dollar store bought, so it is very
cheap to make.
